High Performance Coatings and Laminations
“We make it possible!”
Faster, higher, stronger” and better, is only possible through high performance coatings and laminations. From breathable membrane laminations to aluminum heat resistant coatings. Our limits in this field is your imagination.
Fibers on one or respectively both sides of the fabric surface are taken out softer feel on the raised side; loss of the original fabric structure; higher volume due to protruding fibers.
Impregnation used mainly for protective clothing.Impregnation causes water-and oil resistant behavior of the fabric.
Water – and oil resistant impregnation;
hydraulic test; used for protective clothing with highest performance for non wetting properties.
Membranes for protective clothing (e.g. firemen) assure, that no water can penetrate the clothing from outside to inside; at the same time the membrane has good porosity, i.e. vapor (body perspiration) can penetrate through the membrane to the outside.
Comparable to a barrier against water and chemicals: penetration of humidity not possible from either side.
Similar to a.m. silicone coating on PU basis;
Comparable to a barrier against water and chemicals: penetration of humidity not possible from either side; PVC coating has no breathing properties.
WATER BASED COATING
Barrier coatings on knitted, woven and nonwoven fabrics with water based coating agents.
SOLVENT BASED COATING
Barrier coatings on knitted, woven and nonwoven fabrics with solvent based coating agents.
Protection against liquids; vapor can penetrate through the membrane: transparency; flexible up to a temperature of 95 C: resistant against oil; high flex resistance, high tensile strength and abrasion resistance.
THE COATING AND LAMINATING POSSIBILITIES OF GENTUĞ TEXTILE ARE AS FOLLOW:
2 Hotmelt Lamination lines 250 cm working width, 2 Slotdie lines 250 cm working width, Multiroller 250 cm working width, 2 Foam, Knife and Screen Coating line (water and solvent based coatings) 250 cm working width, Double Dot Coating Line 200 cm working width, Scatter Dot Coating Line 200 cm working width, Paste Dot Coating Line 250 cm width.