Türkçe
Deutsch
Русский
FrançaisEco Coverlay Self-Adhesive Floor Protection Fleece
Eco Coverlay is a reusable temporary floor protection felt by Gentuğ Textile: a 265 g/m² felt made with 57% recycled PES and a self-adhesive thermoplastic underside that holds on the floor, protects it on site and lifts off without residue. It leaves no marks on any floor, can be used on underfloor-heated floors and keeps its grip use after use.
Product Overview
Grip Without the Trace
Construction, renovation and fit-out work puts finished floors at risk. Single-use films leave residue, loose covers slip underfoot and cardboard soaks through. Eco Coverlay is Gentuğ Textile’s answer: a temporary protection fleece that stays in place, protects the surface and comes off clean.
The top layer is a needled felt made with 57% recycled PES that cushions the floor against tools, dropped objects and foot traffic. The underside is a self-adhesive thermoplastic coating: its tack comes from the coating itself, with no separate glue layer. It holds the fleece firmly on the floor without tape and resists liquids, yet leaves no adhesive film or marks when removed.
After the job, Eco Coverlay is simply rolled up and taken to the next site. Reusable project after project, it cuts material costs and waste compared with disposable protection.
Product demonstration: laying, utility knife drop test and residue-free removal.
Applications
Where Eco Coverlay Is Used
Renovation & Painting
Protects parquet and finished floors while walls are painted and rooms are renovated.
Trade Shows & Exhibitions
Temporary floor cover during stand build-up and dismantling in exhibition halls.
Stairs & Step Edges
Holds on treads and landings so stairs stay protected and safe to walk on.
Sanitary & Plumbing Work
Cut to fit around fixtures to protect tiles during bathroom and plumbing installation.
Also used for
Application scenes are product visualizations.
More Applications
One Felt. Multiple Applications.
From marine refits to restaurant tables, Eco Coverlay brings practical surface protection to different working environments.
Shipyards & Marine Refit
Protect finished interior floors and work surfaces during maintenance and refurbishment.
Boat & Yacht Maintenance
Cover cabin floors, tables and work areas during repairs and seasonal upkeep.
Restaurants & Hospitality
Use as an economical felt table covering or a protective layer beneath a decorative tablecloth.
With its soft felt face and self-adhering coated underside, Eco Coverlay is easy to cut to size and position where protection is needed. Reuse it when clean and in suitable condition to help reduce disposable covering waste.
Application scenes are product visualizations.
Key Properties
Protection That Stays, Removal That’s Clean
Self-Adhesive, Anti-Slip
The thermoplastic underside adheres to the floor by itself – no glue layer, no tape – so the fleece stays in place and does not slip.
Residue-Free Removal
Peels away cleanly – no adhesive film, no marks, no post-installation cleaning of the substrate.
Reusable Across Projects
Roll up after use and deploy again, reducing material cost per project and waste.
Impact Protection
A 265 g/m² recycled PES felt face cushions the floor against tools, dropped objects and foot traffic.
Liquid Barrier, Absorbent Option
The coated underside resists liquid penetration (min. 0.2 bar, EN ISO 811). An absorbent felt finish is available as an option.
Built for Site Use
Min. 280 N/5 cm tensile strength and 40,000 Martindale cycles abrasion resistance.
Surface & Structure
Soft Felt. Smart Coating.
Two surfaces, one solution
Eco Coverlay combines a needled felt face with a self-adhesive thermoplastic coating. The felt does the protecting; the coating holds the fleece on the floor and provides a liquid barrier.
Surface Compatibility
Suitable for Sensitive Floors
Eco Coverlay leaves no marks on any floor; for special coatings, please contact us. Not for freshly laid or curing floors (fresh screed, new varnish or new parquet).
Why Eco Coverlay
Solving the Weak Points of Common Floor Protection
vs. adhesive-backed fleeces
No marks, even on underfloor heating
Many adhesive protection fleeces must be tested first, can leave marks or require the floor heating to be switched off. Eco Coverlay leaves no marks and can be used on underfloor-heated floors.
vs. single-use PE film
No residue, no disposal
Reusable on multiple jobs instead of being thrown away after one.
vs. loose covers
Stays in place
Holds on the floor without tape, so it does not slip or shift underfoot.
vs. felt underlay
Made for protection duty
Engineered with a self-adhesive coated underside that stays in place and resists liquids.
vs. cardboard & paper
Durable & moisture-resistant
Does not soften or tear when wet and can be repositioned.
How It Works
Lay. Protect. Remove. Reuse.
Shown in our product demonstration: Eco Coverlay goes down in seconds, takes the hits on site and comes up clean for the next project.
Lay
Roll out by hand and press into place – no tape, no preparation.
Protect
The needled felt absorbs impacts from tools and dropped objects.
Remove
Lift and roll up – no adhesive film, no marks, no cleaning.
Reuse
Store the roll and lay it again on the next job site.
Product Range
Four Weights for Every Job
| Property | Eco Coverlay 195 | Eco Coverlay 265 | Coverlay 270 | Coverlay 340 |
|---|---|---|---|---|
| Weight (g/m²) | 195 | 265 | 270 | 340 |
| PES felt / coating | 41% / 59% | 57% / 43% | 30% / 70% | 44% / 56% |
| Tensile warp / weft (N/5 cm) | 95 / 135 | 190 / 280 | 135 / 170 | 210 / 295 |
| Elongation warp / weft | 50% / 80% | 55% / 75% | 60% / 80% | 60% / 75% |
| Tear warp / weft (N) | 105 / 105 | 285 / 180 | 175 / 135 | 300 / 220 |
| Abrasion (cycles) | 20,000 | 40,000 | 20,000 | 40,000 |
| Hydrostatic pressure | 0.2 bar | 0.2 bar | 0.2 bar | 0.2 bar |
Values per Gentuğ Textile technical data sheets. Weight tolerance ±10%.
Technical Data
Eco Coverlay 265 – Tested to EN ISO Standards
| Property | Unit | Requirement | Standard |
|---|---|---|---|
| Tensile Strength – Warp | N/5 cm | Min. 190 N | TS EN ISO 1421 |
| Tensile Strength – Weft | N/5 cm | Min. 280 N | TS EN ISO 1421 |
| Elongation at Break – Warp | % | Min. 55% | TS EN ISO 1421 |
| Elongation at Break – Weft | % | Min. 75% | TS EN ISO 1421 |
| Tear Strength – Warp | N | Min. 285 N | TS EN ISO 4674-1 |
| Tear Strength – Weft | N | Min. 180 N | TS EN ISO 4674-1 |
| Hydrostatic Pressure | bar | Min. 0.2 bar | EN ISO 811 |
| Abrasion Resistance | cycles | Min. 40,000 | TS EN ISO 12947-2 |
| Harmful Substances | – | Certified | OEKO-TEX® Standard 100 · 10.HTR.75684 |
Full technical data sheet available on request.
Underfloor Heating & Sensitive Floors
No Marks. Suitable for Underfloor Heating.
Underfloor Heating Compatible
Eco Coverlay can be laid on floors with underfloor heating, so heated rooms stay protected during renovation and fit-out work.
No Marks on Any Floor
The self-adhesive coating holds without a separate glue layer and leaves no marks on any floor when the fleece is lifted. For special coatings, please contact us.
Grip That Lasts
Eco Coverlay can be reused many times – its self-adhesive property does not wear off from one job site to the next.
Not for Freshly Laid Floors
Do not lay Eco Coverlay on freshly laid or curing floors such as fresh screed, new varnish or newly installed parquet.
For Distributors & Brands
Private Label Floor Protection from the Manufacturer
Private Label
Gentuğ Textile manufactures Eco Coverlay in its own facilities in Türkiye and can supply it under your brand.
Weights & Widths
Four weights from 195 to 340 g/m² and widths from 100 to 220 cm; roll length on request.
Samples & Data Sheets
Samples and the full technical data sheet are available on request for distributors, contractors and trade show builders.
Frequently Asked Questions
Can Eco Coverlay be used on underfloor heating?
Yes. Eco Coverlay can be used on floors with underfloor heating.
Does Eco Coverlay leave marks on the floor?
No. Eco Coverlay leaves no marks on any floor. Its tack comes from the thermoplastic coating itself, with no separate glue layer. For special coatings, please contact us.
Can Eco Coverlay be used on freshly laid floors?
No. It should not be laid on freshly laid or curing floors such as fresh screed, new varnish or newly installed parquet.
Is Eco Coverlay available as a private label product?
Yes. Gentuğ Textile manufactures Eco Coverlay and can supply it under your own brand. Contact us with your required weight, width and quantity.
Can Eco Coverlay be used on boats and in restaurants?
Yes. In shipyards and marinas it protects finished interior floors, cabin floors, tables and work areas during refits, repairs and seasonal maintenance. In restaurants and hospitality it can be used as an economical felt table covering or as a protective layer beneath a decorative tablecloth.
What is Eco Coverlay?
Eco Coverlay is a reusable temporary surface protection felt by Gentuğ Textile. A needled felt top made with 57% recycled PES is combined with a self-adhesive thermoplastic underside that holds on the floor and removes without residue.
How does Eco Coverlay stay in place without leaving residue?
The underside is a self-adhesive thermoplastic coating. Its tack comes from the coating itself rather than a separate glue layer, so it holds firmly on the floor without tape and lifts off cleanly, leaving no adhesive film or marks.
Is Eco Coverlay absorbent?
The coated underside acts as a liquid barrier (min. 0.2 bar, EN ISO 811), protecting the floor below. An absorbent felt finish that takes up liquids on the top surface is available as an option on request.
Which floors can it be used on?
It is suitable for hardwood and parquet, ceramic tile, natural stone, laminate and LVT, linoleum and vinyl, concrete and screed, carpet, stairs and underfloor-heated floors. It leaves no marks on any floor; for special coatings, please contact us. It is not intended for freshly laid or curing floors.
Can Eco Coverlay be reused?
Yes. Eco Coverlay can be reused many times: after the job it is rolled up and laid again on the next site, and its self-adhesive property does not wear off.
What are the technical specifications of Eco Coverlay 265?
Weight 265 g/m² (±10%); tensile strength min. 190/280 N/5 cm warp/weft (TS EN ISO 1421); tear strength min. 285/180 N (TS EN ISO 4674-1); hydrostatic pressure min. 0.2 bar (EN ISO 811); abrasion resistance min. 40,000 cycles (TS EN ISO 12947-2).
Which widths and weights are available?
Eco Coverlay 265 is available in widths from 100 to 220 cm, with roll lengths on request. The range also includes Eco Coverlay 195, Coverlay 270 and Coverlay 340.
Is Eco Coverlay certified?
Yes. Eco Coverlay is certified to OEKO-TEX® Standard 100 (certificate no. 10.HTR.75684), confirming it has been tested for harmful substances.
Who manufactures Eco Coverlay?
Eco Coverlay is manufactured by Gentuğ Textile in Türkiye, a technical textile company based in Merter, Istanbul, specializing in lamination and coating. Samples and technical data sheets are available for export customers.
🍽️ Also used as a table protector
Besides floors and stairs, Eco Coverlay works as a soft, cushioning table underlay in homes, hotels and restaurants.
Ordering
Orders & Samples
Minimum order
Minimum order quantities depend on the product and the degree of customisation. We confirm them together with your quote.
Samples
Samples are available on request. Tell us which product and specification you would like to test.
Lead time
Lead times depend on order size and specification and are confirmed in our offer.
Customisation
Ask us about custom sizes, colours, packaging or private label – we will check what is possible for your product.
Request Samples & Technical Data
Test Eco Coverlay on your own floors. Ask our export team for samples, roll options and a quotation.